PURPOSE: SecuraSpan Horizontal Lifeline (HLL) systems are designed to be used as an anchoring means for up to six personal fall arrest systems (PFAS). The SecuraSpan system may be used in situations where a combination of horizontal mobility and fall protection is needed. The SecuraSpan HLL system can consist of a single Lifeline span or multiple Lifeline spans.
HORIZONTAL LIFELINE SPAN: The maximum horizontal lifeline span length is 60 ft. (18.3 m). The system length can be extended by using Intermediate Stanchions to create multiple spans (see Figure 1). The span length must be reduced when clearance is limited
The SecuraSpan I-Beam Stanchion is used as the end and intermediate Stanchions for Horizontal Lifeline (HLLs) mounted on steel I-beams/ Wide Flange beams. SecuraSpan HLL systems can be comprised of a single Lifeline span or multiple Lifeline spans.
Beam Size Requirements - The standard Stanchion (7400055) is equipped with a Beam Clamp Assembly that accommodates ﬂange widths from 12 in. - 18 in. (30.5 cm - 45.7 cm) 2 1/4" (5.7cm) thick
DESCRIPTION: Stanchion with rebar/shear stud base with intermediate and end anchor brackets (7400215), fits 1/2"-1" diameter (#4 to#8 rebar) and 4"-12" (10.1-30.5cm) center to center
Optional Base Clamp Assemblies (2A) are available for the ﬂange width ranges 6"-24" and 6" to 36" wide flange
Tie-off point before decking or other fall protection is available on pre-stressed concrete beams with rebar or shear studs. Stanchions are adjustable from vertical 20 degrees left or right for easy passage, or completely horizontal for transportation to jobsite.
Extremely Lightweight and Portable Provides fast and easy handling, installation and storage for maximum worker productivity.
•Single and Multi-Span Flexibility Provides complete customization of your system depending upon the clearance below the work area and overall length needed.
•Pass-Thru 100% Tie-Off Protection The multi-span intermediate provides bypass capabilities for continuous connection, complete horizontal mobility and 100% protection.
•Integrated Energy Absorber Zorbit energy absorber limits fall arrest forces on the worker to safe levels, minimizes fall clearance needed and protects the structure.
•Flexible System Capacity System capacity of 2 workers per span, with a maximum of 6 workers on multi-span systems provides added job site flexibility.
•Durable Construction Extremely rugged zinc plated carbon steel construction provides corrosion resistance for longer service life.
Fast, Easy & Safe Installation
• Simply attach with torque wrench
• Simple chain tie-back connection
• Fits ½” to 1” diameter (#4 to #8 rebar)and 4” to 12” center to center
• Height of Installed Stanchion: 36” (91.44 cm)
• Minimum Breaking Strength: 5,000 lbs (22.2 kN)
• Zorbit Energy Absorber: Peak Dynamic Pullout Load: 2,500 lbs (11 kN)
• Average Dynamic Pullout Load: 2,000 lbs (8.9 kN)
• Maximum Pullout:48.5 in (1.25 m)
• Minimum Tensile Strength: 5,000 lbs (22.2 kN